Truck Side Marker&Clearance Light 5010306792 for Renault Magnum

Renault Truck Side Marker Lamp — OE 5010306792

This is the rectangular amber side marker lamp used across the Renault Trucks range and shared with Volvo, DAF and Iveco. One lamp covers both sides, and the rectangle body can be mounted horizontally or vertically, so the same unit serves the cab side, the chassis and the trailer. The two fixing bolts sit 84 mm apart and the lamp is supplied as a complete unit with its bulb holder and a W5W bulb running on 12/24V. The amber lens doubles as a reflector and the housing carries an AMP JPT 2 pin connector. Direct replacement for OE 5010306792.

• Amber rectangular side marker lamp for Renault Trucks, also listed for Volvo, DAF and Iveco

• One lamp covers both sides, so no left or right variant is needed

• Mounts horizontally or vertically, with the two fixing bolts 84 mm apart

• Bulb type 12/24V with a W5W bulb, no LED electronics to fail

• Amber lens with a built-in reflector function and an AMP JPT 2 pin connector

• Supplied as a complete lamp with the bulb holder; direct replacement for OE 5010306792

1. Is this lamp for the left or the right side?

The same lamp is used on both sides. The left and the right share this one OE number 5010306792, so there is no side-specific variant to choose.

2. How is it mounted?

It is a rectangular lamp that can be fitted horizontally or vertically. The two fixing bolts are 84 mm apart, and the body measures 110 x 50 x 18 mm.

3. Is it LED or bulb?

Bulb. It runs on 12/24V with a W5W bulb, so there is no driver or electronics to fail.

4. Does it come with the bulb holder?

Yes. It is supplied as a complete lamp with the bulb holder and the AMP JPT 2 pin connector. The bulb itself is not included.

5. Which trucks does it fit?

Renault Trucks Magnum, Premium, Kerax, Midlum and the Gamme B, J and R, as well as the Volvo FL, DAF 75, 85, XF, CF and LF, and Iveco and Irisbus vehicles.

Certification you can verify

This is a replacement lighting component. Neither mark can be added to a lamp retrospectively. CE marking addresses the European product requirements, while the E-mark is ECE type approval for the lighting, and on approved models it is applied permanently to the housing of the side marker light with the issuing country code, the regulation and the approval number. The approval number can be verified against the published ECE regulation and the test documentation is available on request. As with any lighting approval, it belongs to the product and to the manufacturer who holds it.